COMP Cams Pushrod Cutter 7/16in Straight - ccaKD716

*Pushrod Cleaning Brush* There is a simple solution to thoroughly cleaning the internal oil passages of oiling pushrods. The COMP Cams Pushrod Cleaning Brush is specifically designed to handle the task and built to withstand repeated use with nylon bristles and a durable steel shaft. *Pushrod Cutting Bits* These cutters are made specifically to cut pushrods and will cut up to 200 pieces. When the cut is finished, it leaves a .002" to .003" press fit between the pushrod and tip. Cutters may be ordered as needed. Desired cutting speed is 200 RPM or less. *Pushrod Holder (Stabilizer)* This tool is used to safely hold the pushrod while cutting to the desired length. The holder may be placed in a drill press for more secure and accurate cuts and also stabilizes the pushrod to control flex while cutting. The holder has a revolver that will accept 5/16", 3/8" and 7/16" pushrods. It also has a threaded hole located on top of the tool that can be used as a stop for quick, same-length cuts. Desired cutting speed is 200 RPM or less. *Pushrod Assembly Tool* This simple tool makes assembling pushrod kits so easy that anyone can do it. Simply cut the tubing in a lathe, deburr the ends and use the assembly tool to press the ends in place, without the risk of splitting or bending the pushrod. Anyone who has ever used the block of wood and hammer technique will truly appreciate this innovative tool. PartNumber : ccaKD716 Description : 7/16" Pushrod Cutter Title : KD716 Pushrod Cutter, 7/16" Straight .188/.287 Bore : 0.284 California Proposition 65 : WARNING: Cancer and Reproductive Harm P65Warnings.ca.gov Pilot : 0.184 Recommended Cutting Speed : 200 Pilot : 0.184in Fabrication::Tools